Lets take a peek at your network environment: with the pc connected to the router, Click on Start . . Run . . type CMD. At the > prompt type or copy and paste the following command: ipconfig/all > 0 & notepad 0. and press enter. Come back here and Paste the results in a message.
Jul 24, 2019. #1. Hi All, I am having issues accessing the admin page of my Zyxel router. I tried entering its IP address into the browser but it gave me a 'This site can't be reached' message. Then I did a factory-reset on my router, waited 2-3 minutes for it to load and my PC to find it again, and then I WAS able to access the admin page
With UPnP enabled, log in to your NAS appliance. Then head to the Control Panel > Network > TCP/IP > Network Interface > edit your network interface and set the static IP address to the appliance. After this, go to the Service > WebDAV menu and enable the WebDAV service. With WebDAV service enabled, head to the UPnP Port Mapping menu, on the
In other words, I already have a router that I am using and I only want to use the Voip functionality of the Zyxel device. To that end, I did the following configurations: Connected Zyxel to my computer via ethernet and changed its IP address to 192.168.1.10. And in the WAN ocnfiguration, I changed the mode from "Router" to "Bridged".
2) Device is registered but cannot be configured correctly - Reset device. If the device cannot get online on Nebula Control Center when you do the registration, please reset the device. On NSG Series for example, you can find the reset hole near the Ethernet port connection. Other devices might have different placements.
. 310 110 397 376 422 281 438 24
can t connect to zyxel router
